General |
Product Name: |
INSTEON Thermostat with Humidity Sensor |
Brand/Manufacturer: |
INSTEON |
Manufacturer Product No.: |
US |
2732-222 |
EU |
2732-422 |
AUS / NZ |
2732-522 |
UPC: |
US |
813922010824 |
EU |
813922012859 |
AUS / NZ |
813922012866 |
Patent: |
Protected under U.S. and foreign patents (see www.insteon.com) |
Warranty: |
2 years, limited |
INSTEON |
INSTEON powerline mesh repeater: |
No |
INSTEON RF mesh repeater: |
Yes |
INSTEON controller: |
Yes |
INSTEON responder: |
Yes |
Maximum links/scenes: |
400 |
LED: |
Red when Heating is active, green when Cooling is active
Off when neither mode is active
Blinks red or green during setup |
LED brightness: |
LED can be enabled or disabled locally or via software |
Local control: |
Yes |
Commands supported as controller: |
On |
Off |
Commands supported as responder: |
On |
Off |
Beep |
Software configurable: |
Yes |
RF range: |
Up to 50 meters open air |
Phase bridge detect beacon: |
No, RF only device |
INSTEON device category: |
0x05 (all frequencies) |
INSTEON device category: |
2732-222 (915 MHz) |
0x0B |
2732-422 (869 MHz) |
0x0F |
2732-522 (921 MHz) |
0x10 |
X10 |
X10 address: |
N/A |
X10 transmitter: |
N/A |
X10 receiver: |
N/A |
X10 status response: |
N/A |
X10 resume dim: |
N/A |
X10 minimum transmit level: |
N/A |
X10 minimum receive level: |
N/A |
X10 messages repeated: |
N/A |
Mechanical |
Mounting: |
Wall mount |
Wire connections: |
Common 24V
Power 24V
Heat 1
Heat 2
Fan
Cooling 1
Cooling 2
|
Screw clamp connections: |
Yes, 10 position |
Case color: |
White |
Set button: |
1 |
Plastic: |
UV stabilized ABS |
Beeper: |
Yes |
Beep on button press: |
Optional (off by default) |
Dimensions: |
5.7" x 3.6" x 1.1" (14.5cm x 9.1cm x 2.8cm) |
Weight: |
0.451 lbs |
Operating environment: |
Indoors |
Operating temperature range: |
39°F - 104°F (4°C - 40°C) |
Operating humidity range: |
0 - 90% relative humidity |
Storage temperature range: |
-4°F - 158°F (-20°C - 70°C) |
Electrical |
Voltage: |
24VAC |
Frequency: |
50 / 60Hz
Note: This is an RF device. Frequency shown because AC provided from HVAC system. |
Load types: |
HVAC
|
Maximum load: |
N/A |
Minimum load: |
N/A |
User replaceable fuse: |
No |
Hardwired remote control: |
N/A |
Retains all settings without power: |
Yes, saved in non-volatile EEPROM |
Standby power consumption: |
< 0.75 Watts |
Certifications: |
FCC, IC Canada, EN
International |
FCC I.D.: |
SBP2441T |
Safety approval(s): |
N/A, low voltage device |