General |
Product Name: |
INSTEON DIN Rail Dimmer |
Brand/Manufacturer: |
INSTEON |
Manufacturer Product No.: |
US |
2452-222 |
EU |
2452-422 |
AUS / NZ |
2452-522 |
UPC: |
US |
813922012798 |
EU |
813922012804 |
AUS / NZ |
813922012811 |
Warranty: |
2 years, limited |
INSTEON |
INSTEON Powerline Mesh Repeater |
Yes |
INSTEON RF Mesh Repeater |
Yes |
INSTEON Controller |
Yes |
INSTEON Responder |
Yes |
Maximum links/scenes: |
400 |
Load brightness levels: |
32 locally (256 with software) |
Status LED: |
Green when load is on, red when load is off |
Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software) |
Blinks green or red during setup |
Blinks red or green (depending upon state of load) to indicate traffic (must be enabled via software) |
LED brightness: |
Adjustable from off to 100% bright |
Local on-level: |
Adjustable from 32 fixed brightness levels or resume dim |
Local ramp rate: |
Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) |
Local control: |
Yes |
Commands supported as controller: |
On |
Off |
Fast on |
Fast off |
Begin brighten |
End brighten |
Begin dim |
End dim |
Commands supported as responder: |
On |
Off |
Fast on |
Fast off |
Begin brighten |
End brighten |
Begin dim |
End dim |
Incremental brighten |
Incremental dim |
Beep |
Software configurable: |
Yes |
Ramp Rates (full-ON to full-OFF): |
0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software |
RF range: |
150 feet open air |
Phase detect beacon: |
Yes |
X10 support: |
Yes |
X10 addresses: |
Any 1 of 256 (unassigned by default) |
INSTEON device category: |
0x01 dimmable lighting control |
INSTEON device subcategory: |
US |
0x34 |
EU |
0x36 |
AUS / NZ |
0x37 |
Mechanical |
Mounting: |
35mm (top hat) DIN rail |
Wire connections: |
N/A |
Max. cable size: |
4mm², 12 AWG (2.72mm diameter) |
Min. cable size: |
1.5mm², 15 AWG |
Screw DIN rail connections: |
Line |
Neutral |
Load |
Sense 1 |
Sense 2 |
Case color: |
White |
Set button: |
Yes |
Plastic: |
UV stabilized polycarbonate |
Beeper: |
Yes |
Beep on button press: |
Optional (off by default) |
LED: |
1 RGB |
Dimensions: |
3.14"H x 2.05"W x 2.48"D |
Weight: |
6.17 oz (175g) |
Operating environment: |
Indoors |
Operating temperature range: |
32° to 104°F (0° to 40°C) |
Operating humidity range: |
0-90% relative humidity |
Storage temperature range: |
-4° to 158°F (-20° to 70°C) |
Electrical |
Voltage: |
100VAC to 240VAC |
RF Frequency: |
US |
915 MHz |
EU |
869 MHz |
AUS / NZ |
921 Mhz |
Electrical Frequency: |
50/60 Hz auto-detected at power-up |
Min. load: |
5W at 240VAC
5W at 120VAC |
Max. load: |
300W at 240VAC
150W at 120VAC |
Load types: |
Resistive
Low voltage halogen
Incandescent |
User replaceable fuse: |
US |
16A, 5x20mm slow blow/burn glass fuse |
EU |
2A, 5x20mm slow blow/burn glass fuse |
AUS / NZ |
Hardwired remote control: |
Yes, either latching or momentary switches supported |
Retain all settings without power: |
Yes, saved in non-volatile EEPROM |
Standby power consumption: |
<1W |
Safety approved: |
ETL, CE, C-Tick |
Certifications: |
FCC 15.107, 15.109, 15.249
RSS 210
EN 300 220-2, 301 489-3
AS/NZS 4268, CISPR 22
UL 1472
IEC 60669-2-1 |
FCC ID: |
SBPDR01 |